Convert WAV to M4A, a fraction of the size

Turn any sound file into MP3, WAV, M4A, OGG or AAC, right in your browser.

or drop one or more anywhere on this page
Runs in your browser, never uploadedNo watermarkFree, no account

Audio Tools

Sound files converted, edited and changed on your device.
Audio converterTurn any sound file into MP3, WAV, M4A, OGG or AAC, right in your browser.WAV to MP3Turn WAV files into MP3s that play on any phone, car stereo or music app.Trim audioCut a sound file down to the part you want, with an optional fade in and out.Split audioCut a long recording, a podcast or an audiobook into several files.Merge audioJoin several sound files into one, in the order you choose.Compress audioMake an MP3 or any sound file smaller, to email it or get it under an upload limit.Change audio speedSpeed a song or a recording up or slow it down, and keep its pitch.BPM changerChange a song's tempo from one BPM to another, and keep its pitch.Audio volume boosterMake a sound file louder or quieter, or lift a quiet one to a safe level.Loop audioRepeat a song, a beat or a sleep sound as many times as you like, in one file.Reverse audioPlay a song, a voice or any sound backwards, and save it.Ringtone makerCut your favourite part of a song into a ringtone for an iPhone or an Android phone.Vocal removerSplit a song into its vocals and the music without the voice, listen to each, and save them as MP3 or WAV.Bass boosterAdd more bass to a song or recording, without distortion.Audio pitch changerMove a song up or down in key and keep its speed.Slowed and reverb generatorSlow a song down, drop its pitch and add a dreamy reverb.Nightcore makerSpeed a song up and raise its pitch, the Nightcore way.8D audio converterMake a song circle around your head on headphones.Remove background noiseTurn down steady hiss, hum and fan noise behind a voice.MP3 to MP4Turn a song, podcast or voice note into a video with a picture, for sites that only take video.Audio visualizerMake a video of your song with bars or a wave that move to the music.MP3 tag editorChange an MP3's title, artist, album and cover art, without touching the sound.BPM and key finderFind the tempo and the musical key of a song file, for mixing, practice or remixing.MP3 to MIDITurn a recorded melody into MIDI notes you can edit in your music software.Microphone testSee your microphone's level as you speak, record a few seconds and hear how you sound.Tone generatorPlay a steady tone at any frequency from 20 to 20,000 Hz, and save it as a WAV file.BPM tapperTap along to any song with a key or the button, and see its tempo in beats per minute.Transcribe audioTurn a recording into text on your own computer, and save it as plain text or as subtitles.Extract audioSave the sound of a video as MP3, WAV or AAC.

How it works

  1. 1
    Choose your WAV files
    Select one or more, or drop them on the page. They open in this tab straight away; nothing is uploaded.
  2. 2
    Set it up
    Pick the format to save as, and the quality. Each choice shows the size of the new file.
  3. 3
    Save the result
    Press Convert to M4A. Each file is made on your device and saved where you choose.
Where your file goes
Nowhere. It stays on this device.

The file is read from your disk and processed inside this tab. Close the tab and nothing is left anywhere else.

What it takes
WAV files, one or many

WAV files convert quickly, with no size limit. Any other sound file works here too.

A WAV keeps every sample of a recording and squeezes nothing out, which makes it huge: about 10 MB for each minute of CD-quality stereo. A three-minute song comes to around 30 MB, and an hour-long session runs past 600 MB. That is a lot to carry on a phone, add to a music collection or attach to a message.

An M4A at 128 kbps holds the same minute in about 1 MB. It is AAC sound in the file iPhones, Macs and Apple Music use, and it plays on Windows, Android and VLC too. This WAV to M4A converter makes it inside your browser, free, with nothing uploaded.

Why a WAV is so large, and how an M4A shrinks it

A WAV is uncompressed. CD-quality sound is 44,100 samples a second, 16 bits each, for two channels, which adds up to 1,411 kbps. An M4A uses AAC, which saves space by leaving out detail that is hard to hear, and writes the same minute at the bitrate you pick.

One minute of stereo sound, as WAV and as M4A
FileBitrateSize per minute
WAV, CD quality (44.1 kHz, 16-bit)1,411 kbpsAbout 10 MB
WAV, studio (96 kHz, 24-bit)4,608 kbpsAbout 35 MB
M4A, 192 kbps (Best quality)192 kbpsAbout 1.4 MB
M4A, 128 kbps (Balanced)128 kbpsAbout 1 MB
M4A, 96 kbps (Smallest)96 kbpsAbout 0.7 MB

This is where going from WAV to M4A earns its keep. The WAV is the original, so the sound is compressed once, from the best copy you have, rather than a second time from a file that was already squeezed. That is the best start an M4A can have.

How to convert WAV to M4A on this page

  1. Press Select WAV files and choose one or more, or drop them anywhere on this page. Other sound files work too. To try it first, use the link "No WAV to hand? Try it with a sample →".
  2. Press play to hear the recording, then read the summary box. It lists the Length, Channels and Sample rate, and how the file will be written, such as M4A: AAC, 128 kbps.
  3. M4A is already chosen under Save as. Compare its size with the one under the WAV tile, then pick a Quality: 96 kbps (Smallest), 128 kbps (Balanced, chosen first) or 192 kbps (Best quality).
  4. Press Convert to M4A. On the Your audio is ready screen, press Save M4A, or Save all as ZIP when you converted several files.

Your WAV is only read, never changed. Each M4A takes the name of its WAV, so Final mix.wav becomes Final mix.m4a. Press Change settings to go back with the files still loaded and try another quality, or New file to clear the page.

Shrinking a whole session at once

Recorded a set of takes, a run of lectures or a stack of interviews? Select them together or press Add more files, and the button counts them, for example Convert 6 files. They are converted one after another with the same settings. If one cannot be read, the others still convert, and each has its own Save button.

Picking a quality for your M4A

Because the WAV holds every detail, the Quality you pick decides how much of it the M4A keeps. Each tile shows the size your file will be, so you can weigh the choice before you convert.

  • 128 kbps (Balanced), chosen first: music for your phone and Apple Music, and recordings you want to share. Roughly a tenth of a CD-quality WAV.
  • 192 kbps (Best quality): music you care about, or a mix you will play on good speakers. Still around a seventh of the WAV.
  • 96 kbps (Smallest): speech, such as interviews, lectures and voice notes, where a small file counts for more than the last bit of detail.

Mono stays mono and stereo stays stereo. The size depends on the bitrate, so a mono recording at 128 kbps is as big as a stereo one. For a single voice, 96 kbps is usually enough.

Studio WAVs at 88.2 or 96 kHz

A WAV recorded above 48 kHz is saved at 48 kHz, which still covers the whole range people can hear. The summary box says so before you convert, for example Sample rate 96.0 kHz, saved at 48.0 kHz. The bit depth does not carry over either, because an M4A has no bit depth of its own, so a 24-bit WAV converts as well as a 16-bit one.

WAV to AAC or M4A: which file to make

M4A and AAC carry identical sound. What differs is the container: an .m4a file wraps the AAC sound in an MP4 box, while an .aac file is the bare sound with nothing around it.

So a WAV to AAC conversion is one tile away. Pick AAC under Save as and the button changes to Convert to AAC, with the same three Quality tiles. The summary box then reads, for example, AAC: 128 kbps, saved as .aac.

Stay with M4A unless a form or device asks for a file ending in .aac. M4A is the version iPhone, iPad, Mac and Apple Music use, and Windows, Android and VLC play it too.

Tip: Want the widest reach rather than Apple's format? WAV to MP3 makes a file almost any player opens, and WAV to OGG suits games and game-making tools.

Keep the WAV as your master copy

An M4A is the copy for listening and sharing, not for more editing. If you plan to cut, mix or master the recording again, keep the WAV, because each new round of compression costs a little more detail. Turning the M4A back with M4A to WAV gives you a big file with the M4A's sound, not your original.

Your recordings stay on your computer the whole time. The WAV is read and the M4A is made inside your browser tab, the server does no audio work, and nothing is uploaded, which matters for unreleased songs and private interviews. Our privacy policy explains what the site does collect.

WAV files convert quickly in current Chrome, Edge and Firefox, with no size limit. It is free, with no account and no watermark, and not counted in the free daily limit, which applies to document conversions only. For any other sound file, use the Audio converter.

Shrink your WAV into an M4A

Keep the WAV for the studio and carry the M4A everywhere else. Choose your WAV files above, keep 128 kbps or pick the quality that suits the recording, and press Convert to M4A. A CD-quality minute drops from about 10 MB to about 1 MB, and your recordings never leave your device.

Questions people ask

How do I convert WAV to M4A?

Press Select WAV files, or drop your files on this page. M4A is already chosen under Save as, with 128 kbps under Quality, so press Convert to M4A and then Save M4A. The work happens in your browser.

How much smaller is the M4A than the WAV?

For CD-quality stereo, a WAV is about 10 MB a minute and an M4A at 128 kbps about 1 MB, so roughly a tenth. A mono WAV is about 5 MB a minute, and its M4A at 128 kbps is still about 1 MB. The tiles under Save as show the sizes for your own file.

Can I convert WAV to AAC instead?

Yes. Pick AAC under Save as for a .aac file with the same sound and the same Quality tiles. Choose it only when something asks for .aac; otherwise keep M4A, the one Apple devices use.

What happens to a 96 kHz or 24-bit WAV?

It converts as usual. A sample rate above 48 kHz is saved at 48 kHz, and the summary box tells you before you convert. The bit depth is not carried over, because an M4A has none of its own.

Will the M4A play on Android and Windows as well as on an iPhone?

Yes. An M4A plays on iPhone, iPad, Mac and in Apple Music, and on Windows, Android and VLC. Starting from an MP3 rather than a WAV? Use MP3 to M4A instead.

Is this WAV to M4A converter free and private?

Yes. There is no account and no watermark, and it is not counted in the free daily limit, which covers document conversions only. Your WAV files are never uploaded: the M4A is made on your own device.

Step by step

  1. 1

    Drop your WAV files, or press Select WAV files.

  2. 2

    M4A is already chosen under Save as. Pick a quality if you like.

  3. 3

    Press Convert to M4A, then Save M4A, or Save all as ZIP for several files.

Our cookies keep you signed in. If you accept, we also load Google Tag Manager, which runs Google Analytics and Microsoft Clarity (which records how you move around the site). None of them run unless you accept. The privacy page has the details.

Read first