Need the tempo of a song for a DJ set, a workout playlist, a dance routine or a metronome? This BPM tapper finds it from your own timing. Play the music, tap along on the beat, and the beats per minute appear as you go.
There is nothing to upload and no microphone involved. Tap with the space bar or almost any other key on a computer, or with your finger on a phone or tablet. The page reads only the times of your taps, inside this browser tab, and keeps nothing.
How to use the BPM tapper
- Start the song in another tab, in an app or on a speaker nearby.
- Tap on every beat: press the space bar or any letter key, or tap the big button. Follow the kick drum or the beat you would clap to.
- Watch the figure above the button. It updates with every tap, and after eight even taps the page tells you the reading is steady.
- Keep tapping a little longer to fine-tune it, then stop and read the result.
- For another song, press Start over, or simply pause for a few seconds: your next tap starts a new count.
Taps in a text box, on a link or on another button are left alone, so the page never counts a key you meant for something else. Tab still moves around the page as usual.
Where knowing the tempo helps
- DJ sets and mixes. Two songs blend smoothly when their tempos are close, so knowing each one helps you plan the order and how far to nudge the speed.
- Running and workout playlists. Many people like music whose beat matches their steps, and tapping along tells you which songs fit.
- Dance and fitness classes. Teachers pick songs by tempo so a routine feels the same each time.
- Practising an instrument. Set your metronome or music app to the song’s tempo, then slow it down while you learn the hard parts.
- Editing video. Cuts that land on the beat feel natural, and the tempo tells you how long each beat lasts.
In each case the BPM tapper gives you the number in under a minute, with nothing to install and no file to find.
How the tap tempo is worked out
The tapper does not simply measure the gap between your first and last tap. It draws the best straight line through the times of all your taps and takes the beat length from its slope. Every tap counts, so one tap that lands a little early or late moves the answer far less.
Only your most recent 32 taps are used. If a song speeds up or slows down, keep tapping and the tap tempo follows the change. If you stop for a few seconds, the result stays on screen marked as paused, and the next tap starts fresh.
| Tempo | Time between beats | Beats each second |
|---|---|---|
| 60 BPM | 1 second | 1 |
| 90 BPM | About 0.67 seconds | 1.5 |
| 120 BPM | 0.5 seconds | 2 |
| 150 BPM | 0.4 seconds | 2.5 |
| 180 BPM | About 0.33 seconds | 3 |
Half time, double time and which one is right
Two people can tap the same song and get two answers, one twice the other. One taps every beat, the other every second beat. Neither is wrong: it depends on which pulse you feel. That is why the page shows Half time and Double time beside your reading.
- If the figure seems very slow, look at Double time. A song that feels fast but reads 70 is often 140.
- If it seems very fast, look at Half time. Busy drums can make a song of 85 feel like 170.
- For DJ software or a metronome, match the figure your software or sheet music already uses for similar songs.
As a quick check, count the beats in fifteen seconds and multiply by four. The answer should be close to one of the three figures on screen.
Songs in triple time, such as a waltz, can be confusing too. Tap the strong first beat of each bar and you get a third of the tempo; tap every beat and you get the full figure. When in doubt, tap what you would clap along to at a concert, which is almost always the beat the song is counted in.
Getting an accurate BPM counter reading
- Tap with a steady hand on a table or with one finger. Tapping with your whole arm makes the gaps uneven.
- Listen for the clearest sound: the kick drum, a hand clap or a hi-hat on every beat.
- Give it time. Sixteen taps or more are usually enough for a reading that stops changing.
- Start over after a mistake. One very late or doubled tap pulls the reading for a while; Start over clears it at once.
- Use a computer keyboard for the steadiest timing. On a phone, tap the big button lightly rather than holding it.
Once you know the tempo, the tone generator can play a reference pitch to tune to, and change video speed can speed a clip up or slow it down to match a beat.
If you have the song as a file, the BPM finder can read the tempo from the file itself, with no tapping, and tell you its key too.
Nothing is recorded
This way of finding the tempo of a song never listens to your music. It has no access to your microphone or to the song itself, only to the moments you press a key or tap the button. Nothing is uploaded, and nothing is kept when you close the page. The privacy page explains what the site itself keeps.
If you want to check that a microphone works before you record yourself playing along, try the microphone test. Other sound tools are in the audio tools.
Tap out your tempo
Play your song, tap the button above or press any key on the beat, and read the tempo in seconds. Press Start over for the next one.
Keep tapping a little past the point where the figure settles, glance at half and double time, and you have a tempo you can trust for your playlist, your set or your practice.