You hum a tune into your phone, or you record a riff on a guitar. Now you want those notes in your music software, so you can change the sound, fix a wrong note or write a new part around it. A MIDI file is built for that job, and this MP3 to MIDI page makes one from your recording.
Drop in a recording, press Convert to MIDI and save the file. It is a free way to convert MP3 to MIDI without installing anything. Your audio stays on your device, there is no account and there is no watermark. Below you will find what the MIDI file holds, what kind of recording works well, and how to get a cleaner result.
How to convert MP3 to MIDI in your browser
- Press Select audio files and choose your recordings, or drop them anywhere on the page. If you only want to look around, try the sample.
- Press Convert to MIDI. There is nothing to set.
- When it finishes, the screen says "Your MIDI file is ready" and shows how many notes were found and their lowest and highest pitch, for example "61 notes, from C2 to A5".
- Press Save MID. If you converted several recordings, you get them together as a ZIP.
Each MIDI file keeps the name of its recording, with .mid on the end. Your original file is only read, never changed. You can run the same recording again whenever you like.
The page takes MP3, M4A, AAC, WAV, OGG, Opus and FLAC files. So it works as audio to MIDI for most recordings you are likely to have, and as WAV to MIDI when your take is a WAV. Drop several at once and each one becomes its own MIDI file.
What is inside the MIDI file
A MIDI file is not sound. It is a list of instructions: which note, when it starts, how long it lasts and how hard it was played. Your music software reads that list and plays it with any instrument you pick. That is why you can turn a sung tune into a piano part with one click.
The file this page writes is a standard MIDI file with one track, set to 120 beats a minute. Open it in a music production program (a DAW) or a notation program. There you can change the instrument, move or delete notes, or snap them to the beat (quantise).
| In the file | Not in the file |
|---|---|
| The pitch of each note | The original sound of your recording |
| When each note starts | Drums as drum notes |
| How long each note lasts | Lyrics or words |
| How hard each note was played | The real tempo of the song |
The tempo point matters. The file always says 120 beats a minute, even if your song was slower or faster. The notes still sit in the right places in time. Set your project tempo to match the song and they line up. If you do not know it, the BPM finder can tell you.
What works well, and what does not
We tested this page on recordings made with known notes, so we could check each answer. We used a plucked melody, a bowed melody, a sung-style melody with vibrato, and a recording of three-note chords. Each had 24 notes. These were test recordings, not finished songs, so treat them as a guide and not a promise.
| Recording | What came back |
|---|---|
| Plucked melody | Every note found with the right pitch and start |
| Bowed melody | Every note found with the right pitch and start |
| Sung-style melody with vibrato | Every note found, with one extra stray note on one of the three melodies |
| Three-note chords | Every note found, with 8 extra stray notes |
| A full song with drums, bass and chords | Many stray notes |
In plain terms, it works best on one instrument or one voice at a time. Chords work, but expect to delete a few extra notes. A full mix gives you a starting point at best. The panel says the same before you press the button: a full song with drums and chords gives many stray notes.
- Record one part at a time. A single guitar line, a single vocal or a single keyboard part gives the cleanest notes.
- Keep the room quiet. Fan noise, traffic and talking can show up as extra notes.
- Cut long silences before you convert, in any audio editor. Less empty sound means less to clean up.
- Play or sing clearly, one note at a time where you can. Fast, smeared passages are harder to read.
Speed, the first run and long files
The first time you press Convert to MIDI, the page fetches a small note-finding file, about 0.9 MB, from this site and keeps it for next time. It does not come from anywhere else. The panel shows this under First run.
The notes are found in your browser, on your own computer. An 8-second clip took about 20 seconds in Chrome and in Firefox, including that first load. Longer files take longer in proportion, so a full-length track needs patience.
A file longer than ten minutes is read from its start, so only its first ten minutes are turned into notes. The panel tells you when that happens. If you need a later part, cut it out first and convert that piece on its own.
If a file has no sound, the page tells you so and does not run.
Private, free and on your own device
Most online converters upload your audio to a server. This page does not. The recording is read from your disk, the notes are found in your browser tab and the MIDI file is made on your device. Our privacy policy explains what the site does collect.
Using it is free, with no account and no watermark. It is not counted in the free daily limit, which applies to document conversions only. It works in current Chrome, Edge and Firefox.
Some things are not offered. You cannot turn a MIDI file back into an MP3 here, because that needs a synthesiser to make the sound. You also cannot split instruments out of a mixed song, get drum notes, or get sheet music. For other jobs with your recordings, see the full list of audio tools, or convert WAV to MP3 to shrink a take before you share it.
Get the notes out of your recording
MIDI turns a recording into notes you can edit, re-play with another instrument and build on. For the cleanest result, use one instrument or one voice, keep the noise low and cut the silence. Choose your file above, press Convert to MIDI and save the .mid file to open in your music software.