A podcast recorded in three parts. Voice notes from one long meeting. Two halves of a song saved on different days. Each one needs the same fix: one file instead of several. This page lets you merge audio in your browser, so you can combine audio files into a single MP3 or WAV without installing anything.
Drop in two or more files, put them in order and press Merge audio. It works as an audio joiner for MP3, WAV, M4A, FLAC, OGG and most other sound files, and as a quick way to merge MP3 tracks into one. Nothing is uploaded, there is no account to create and there is no watermark.
How to merge audio files in three steps
- Press Select audio files and choose two or more, or drop them anywhere on the page. Each file appears as a numbered card in a row, under a heading such as "3 files, joined left to right".
- Put the cards in the order you want to hear them. Drag a card to move it, or select one and press Alt with the left or right arrow key. Press Add files to bring in more.
- Check the summary, pick MP3 or WAV under Save as, and press Merge audio. When it finishes, save the joined file.
The new file is named after the first card, with _merged on the end, so a song.mp3 at the front comes back as song_merged.mp3. Your own files are only read, never changed, so you can try a different order as often as you like.
No sound files to hand? Press Try it with a sample under the select button. It opens a sample WAV and a short chime MP3, so you can see how two different files join before you use your own.
Ordering, listening and removing files
Each card shows the file name, its length, whether it is mono or stereo, and its sample rate, such as 44.1 kHz. Click a card to put that file on the preview, then press play. That helps when two takes have similar names. To drop a file, press the remove button on its card. You need at least two files left to merge.
The order of the cards is the order of the result. The card on the left plays first, and each file follows the one before it. No gap is added between files, so a track that ends in silence keeps that silence, and one that stops abruptly runs straight into the next.
Combine MP3, WAV and other sound files in one merge
Your files do not have to match. You can combine MP3 files from your phone with a WAV from a recorder and an M4A voice memo, all in one go. They can also differ in sample rate or channels, for example a 48 kHz stereo song and a 44.1 kHz mono voice note.
Joining files that differ needs care. A file played at the wrong rate sounds sped up or slowed down, with its pitch shifted. So this audio joiner brings every file to the best among them before it joins them, and the panel tells you: "These files have different sample rates or channels. They are brought to the best among them, so none plays too fast or too slow."
| Saved as MP3 | Saved as WAV | |
|---|---|---|
| Sample rate | The highest among your files, up to 48 kHz | The highest among your files |
| Channels | Stereo if any file is stereo, otherwise mono | Stereo if any file is stereo, otherwise mono |
| Quality | The highest bitrate any one of your files would get | 16-bit, every sample kept |
Nothing is made worse than the best file in the set. A 44.1 kHz voice note placed next to a 48 kHz song is raised to 48 kHz, and a mono clip placed next to a stereo one becomes stereo, so the whole result plays at one steady speed.
Saving the joined file as MP3 or WAV
Under Save as, pick one of two tiles: MP3, marked Plays everywhere, or WAV, marked Every sample kept. Each tile shows the size the joined file will be. When the first card is a WAV, WAV is picked for you; otherwise MP3 is.
An MP3 is written at the highest bitrate any one of your files would get on its own. An MP3 keeps about its own bitrate, and any other kind of file counts as 192 kbps. So if you join three MP3s at 128 kbps with one at 320 kbps, the result is 320 kbps, and none of them sounds worse for being joined. Under 32 kHz an MP3 tops out at 160 kbps. A WAV is always 16-bit.
- Files: how many files you are joining.
- Total length: the lengths of every file added together.
- Sound: mono or stereo, and the sample rate the joined file will have.
- Saved as: the format and its quality, such as "MP3, 192 kbps" or "WAV, 16-bit".
Those four lines sit in the panel next to the Merge audio button, so you can check the result before you make it. If the total length looks wrong, one of the files may be longer than you thought: click its card and listen.
Speed, size and privacy
Everything happens in your browser tab. Your files are read from your device and joined there. Nothing is uploaded, and our servers never touch the sound. The privacy policy explains what the site does collect.
When you merge WAV files, or FLAC files, that all share one sample rate and one channel count, they join fast and the editor note reads "Fast, on this device. Nothing uploaded". MP3s, M4As and files of mixed layouts take the slower way, and the note reads "Slower for this file, on this device". The slower way still joins them with no gap, and it takes up to 2 GB in all.
If one of your files has no sound at all, the page names it and asks you to remove it, for example "voice.m4a has no sound. Remove it to join the others". The rest stay in place, so you only lose the one card.
Merging is free, with no account and no watermark. It is not counted in the free daily limit, which applies to document conversions only. It works in current Chrome, Edge and Firefox.
What this MP3 joiner leaves out, and what to use instead
It joins files end to end and nothing more. It does not add a crossfade or a pause between files, and it does not mix files on top of each other, such as a voice over background music. It takes sound files only, so a video cannot go in the same merge.
- To cut a long silence or a false start before you join, open that file in Trim audio first.
- To go the other way and break one long recording into parts, use Split audio.
- If the joined file is too big to send, Compress audio makes it smaller.
- To join video clips, picture and sound together, use Merge videos.
You will find every other sound tool in the audio tools directory.
Join your sound files now
Whether you want to merge MP3 parts of a podcast, combine audio files from a recorder and a phone, or join takes from one session, the steps are the same. Choose your files above, drag them into order, pick MP3 or WAV and press Merge audio. This audio joiner keeps your files on your device the whole time.