A fan you stopped noticing, a mains hum or a steady hiss from a cheap microphone can sit under every word you record. It is easy to miss while you talk and hard to ignore when you play it back. This page lets you remove background noise from audio like that, in your browser, so the voice comes through more clearly.
This audio noise reduction is made for steady noise: hiss, hum, a fan or an air conditioner. It does not take out a door, a dog, music or other people talking, and the panel says so before you start. Pick a strength, hear 10 seconds of the result, and save it as MP3 or WAV. It is free and nothing is uploaded.
Which noises it takes out, and which stay
This kind of audio noise reduction works on sound that stays the same from start to finish. A hiss or a hum never changes, so it can be learned and turned down while the voice stays much as it was. A cough or a bark comes and goes, so it is left alone.
| Sound | What happens to it |
|---|---|
| A steady hiss | Turned down |
| Mains hum | Turned down |
| A fan or an air conditioner | Turned down |
| A door, a dog, a cough or a click | Stays: sudden sounds come and go |
| Music, or other people talking | Stays |
| Echo, or the sound of the room | Stays |
| Wind gusts | Stays |
| Distortion or clipping | Stays |
It also does not make a quiet recording louder. It only lowers the noise, so a soft voice stays soft. If the voice belongs to a video and needs lifting, you can change the volume of the video once the sound is clean.
How it learns your noise first
To remove background noise from audio well, it first needs to hear that noise on its own. So before it changes anything, it looks through the first five minutes of your file for a short pause where only the noise can be heard. That pause tells it what your particular noise sounds like, and it then lowers that noise all the way through the recording.
Sometimes there is no clear pause to learn from: talk with no gaps, for example, or a piece of music. Then it treats the noise as hiss. That works on hiss, but it does much less against a hum or a fan.
Hear it on the sample first
There is a sample to try: a reading with fan noise behind it. Load it, press Play to hear the fan, then press Preview 10 seconds at each strength. It is a quick way to learn what each setting does before you use a file of your own.
Light, Medium or Strong: picking a strength
Strength is the one choice that changes the sound, and Medium is chosen when you open the page. A short note under the choice tells you what to expect: Light takes the edge off the noise, Medium gives a clear drop with the voice still natural, and Strong takes the most noise out.
| Strength | Noise in the pauses | The voice |
|---|---|---|
| Light | About 3 to 8 dB lower | Left as it was |
| Medium | About 6 to 18 dB lower | Still natural |
| Strong | About 11 to 28 dB lower | Can sound thinner over a fan or a hum |
We measured these on speech with a mains hum, a hiss, a fan and a white noise mixed in. Your own result depends on the noise and the recording, so read the numbers as a guide, not a promise.
Before you remove noise from audio for good, press Preview 10 seconds at Medium, then press Play to hear the original at the same spot. If the noise still gets in the way, try Strong. If the voice starts to sound thin, step back to Medium or Light.
How to remove noise from audio in your browser
- Press Select audio files and pick your recording, or drop it anywhere on the page. MP3, WAV, M4A, AAC, FLAC, OGG, Opus, AIFF and WMA all work, as do most other sound files.
- Under Strength, choose Light, Medium or Strong.
- Move the playhead to a spot with both talking and a pause, then press Preview 10 seconds to hear it cleaned.
- Under Save as, choose MP3 (192 kbps, plays everywhere) or WAV (uncompressed 16-bit, nothing lost, larger). Each tile shows the size the file will be.
- Press Remove noise and save the new file where you want it. It is named after your recording with _noise-reduced on the end, such as interview_noise-reduced.mp3.
You can denoise audio files in a batch, such as every episode of a podcast. Drop them together and each is cleaned at the same strength, then save them all at once. A file can be up to 2 GB. Cleaning takes a little longer than a plain conversion, and the footer may say Slower for this file, on this device. A file the length of a song takes seconds on a recent computer, and a long interview takes longer.
Putting the clean sound back under a video
The cleaned file keeps the length of the original and lines up with it to the sample. So you can take the sound out of a clip with Extract audio, denoise audio here, and put it back with Add audio to video set to Replace, without the words drifting away from the picture.
Your recording stays on your device
Recordings that need audio noise reduction are often private: a call, an interview, a voice memo. This tool never uploads them. The file is read in your browser, cleaned on your device and saved where you choose, and the server does no audio work at all. The privacy policy sets out what the site does collect.
It is free, with no account and no watermark, and it is not counted in the free daily limit, which only applies to document conversions. It works in current Chrome, Edge and Firefox. For other changes to sound, from turning a WAV into an MP3 to boosting the bass, browse the audio tools.
Clean up your recording now
Steady noise is the easiest kind to lose, and a clearer voice is easier to listen to. Choose your recording above, start with Medium, preview 10 seconds and press Remove noise. When you want to remove background noise from your audio in future, leave a second or two of quiet at the start, and the tool will have more to learn from.