Some sounds are too short for the job. A 30-second drum groove you want to practise over for ten minutes. A rain recording that ends just as you drift off. This page lets you loop audio into one longer file that keeps going in any player, with no repeat button.
It is a simple audio looper that runs in your browser. Choose a sound file, say how many times it plays or pick a length to fill, and save an MP3 or a WAV. You can loop MP3, WAV, M4A, FLAC, OGG and most other sound files. Nothing is uploaded, and it is free with no account.
Repeat a sound file in five steps
- Choose a sound file, or drop it anywhere on the page. It opens with its waveform as the timeline and a Sound only card on the stage.
- Set Plays to the number of times the file should play, from 2 to 20. It starts at 4. To aim for a length instead, pick one of the Or fill chips: About 10 min, About 30 min or About 1 hour.
- Under Save as, choose MP3 (Plays everywhere) or WAV (Every sample kept). Each tile shows the size the result will be.
- Click the stage or press the space bar to listen. The preview loops the file, so you hear the end run into the start.
- Press Loop audio, then save the new file. It keeps your file's name with the number of plays added, so beat.mp3 played 4 times comes back as beat_x4.mp3.
The summary under the tiles shows One play (the length of your file), Total (how long the result runs) and Saved as, such as "MP3, 192 kbps" or "WAV, 16-bit".
Looping several files at once
Choose or drop more than one file and the button changes to Loop N files, for example Loop 3 files. Every file plays the same number of times and comes back as its own file, and Save all as ZIP downloads them together. If one of them would run past an hour, the page names it.
Choosing a number of plays or a length to fill
Plays is the plain way to set it: the result lasts one play times the number you pick. A 30-second MP3 played 4 times is 2 minutes long, and the Total line does that sum for you each time you change the count.
The Or fill chips work the other way round. Each one picks the whole number of plays that lands nearest its length. The result is about that long rather than exact, it never stops halfway through a play, and it never runs past an hour.
| Your file | Chip | Plays | Result |
|---|---|---|---|
| 30 seconds | About 10 min | 20 | 10 minutes |
| 45 seconds | About 10 min | 13 | 9 min 45 s |
| 4 minutes | About 1 hour | 15 | 1 hour |
| 10 minutes | About 1 hour | 6 | 1 hour |
| 30 seconds | About 30 min | 20, the most | 10 minutes |
The last row shows the catch. A file plays at most 20 times, so to fill 10 minutes it needs to be at least 30 seconds long, to fill 30 minutes at least 90 seconds, and to fill an hour at least 3 minutes. The Total line always shows the real length.
A chip is greyed out when even two plays of your file would pass an hour, which is the case for anything longer than half an hour. If you set more plays than fit, the page says so in words, such as "song.mp3 played 4 times would be longer than an hour. Play it fewer times".
Getting smooth joins between plays
Each play follows the last with no gap. The end of your file runs straight into its start, so a steady tone or a beat carries on without a hole at each join.
That also means whatever sits at the edges of your file repeats. A half-second pause at the end of a beat becomes a half-second pause at every join. For a seamless loop, cut that silence off first with Trim audio.
There is no crossfade at the join. If the last moment of the file does not lead into the first, such as a chord cut off mid-note, you may hear a small jump each time it comes round. A little care when you pick or trim the file helps:
- Music: cut it to a whole number of bars, exactly on the beat, so one bar ends where the next would start.
- Rain, wind, a fan or white noise: choose a stretch where the level stays even, so the join blends in.
- A phrase to practise: leave a short pause at the end on purpose, so you have time to repeat it before it plays again.
Good uses for an audio looper
A looped file is one ordinary sound file, so it plays anywhere with nothing to set up.
Practice tracks
A backing groove, a drum pattern or a tricky passage of a song becomes a track you can play along with for as long as you need. Loop an MP3 of a two-bar phrase 20 times and work on it without pressing replay. Language learners can do the same with a sentence they want to say aloud.
Sleep, rain and focus sounds
A rain, fan or ocean recording is often only a few minutes long. Pick About 30 min or About 1 hour and it plays through a whole wind-down with no break, even on a device that has no repeat setting.
A background beat for a video or a talk
A music bed under a slideshow, a stream or a presentation has to last as long as the thing it sits under. Loop it to roughly that length, then trim the end to fit. If your loop belongs with pictures, Loop video repeats a video clip in one file, and Merge audio joins different sound files one after another.
MP3 or WAV, speed and privacy
Under Save as, a WAV starts as WAV and every other file starts as MP3. An MP3 is saved at about its own bitrate, so a 128 kbps MP3 comes back at 128 kbps. Any other file saved as MP3, such as an M4A or a FLAC, becomes a 192 kbps MP3. A WAV is 16-bit.
The sound is written out fresh in the format you pick, so an MP3 saved as MP3 can lose a very little quality. You will not hear it after one pass, but if you plan to loop the result again, save it as WAV.
| Saved as | Size of one hour |
|---|---|
| MP3, 128 kbps | About 58 MB |
| MP3, 192 kbps | About 86 MB |
| MP3, 320 kbps | About 144 MB |
| WAV, 16-bit | About 635 MB |
Every loop is made the slower way, so the editor note reads "Slower for this file, on this device". A longer result takes longer to make, so leave the tab open until your file is ready.
The whole job runs in your browser tab. Your file is never uploaded and the server does no audio work. Our privacy policy explains what the site does collect. It works in current Chrome, Edge and Firefox.
Make your loop now
A short sound does not have to stay short. Choose your file above, set the plays or pick a length to fill, listen to the preview and press Loop audio. This audio looper gives you one MP3 or WAV of up to an hour, made on your own device. For more ways to edit sound, browse the audio tools.