Android and iPhone ringtone maker: convert an MP3 to a ringtone

Cut your favourite part of a song into a ringtone for an iPhone or an Android phone.

or drop it anywhere on this page
Runs in your browser, never uploadedNo watermarkFree, no account

Audio Tools

Sound files converted, edited and changed on your device.
Audio converterTurn any sound file into MP3, WAV, M4A, OGG or AAC, right in your browser.WAV to MP3Turn WAV files into MP3s that play on any phone, car stereo or music app.Trim audioCut a sound file down to the part you want, with an optional fade in and out.Split audioCut a long recording, a podcast or an audiobook into several files.Merge audioJoin several sound files into one, in the order you choose.Compress audioMake an MP3 or any sound file smaller, to email it or get it under an upload limit.Change audio speedSpeed a song or a recording up or slow it down, and keep its pitch.BPM changerChange a song's tempo from one BPM to another, and keep its pitch.Audio volume boosterMake a sound file louder or quieter, or lift a quiet one to a safe level.Loop audioRepeat a song, a beat or a sleep sound as many times as you like, in one file.Reverse audioPlay a song, a voice or any sound backwards, and save it.Ringtone makerCut your favourite part of a song into a ringtone for an iPhone or an Android phone.Vocal removerSplit a song into its vocals and the music without the voice, listen to each, and save them as MP3 or WAV.Bass boosterAdd more bass to a song or recording, without distortion.Audio pitch changerMove a song up or down in key and keep its speed.Slowed and reverb generatorSlow a song down, drop its pitch and add a dreamy reverb.Nightcore makerSpeed a song up and raise its pitch, the Nightcore way.8D audio converterMake a song circle around your head on headphones.Remove background noiseTurn down steady hiss, hum and fan noise behind a voice.MP3 to MP4Turn a song, podcast or voice note into a video with a picture, for sites that only take video.Audio visualizerMake a video of your song with bars or a wave that move to the music.MP3 tag editorChange an MP3's title, artist, album and cover art, without touching the sound.BPM and key finderFind the tempo and the musical key of a song file, for mixing, practice or remixing.MP3 to MIDITurn a recorded melody into MIDI notes you can edit in your music software.Microphone testSee your microphone's level as you speak, record a few seconds and hear how you sound.Tone generatorPlay a steady tone at any frequency from 20 to 20,000 Hz, and save it as a WAV file.BPM tapperTap along to any song with a key or the button, and see its tempo in beats per minute.Transcribe audioTurn a recording into text on your own computer, and save it as plain text or as subtitles.Extract audioSave the sound of a video as MP3, WAV or AAC.

How it works

  1. 1
    Choose a sound file
    Select it, or drop it on the page. It opens in this tab straight away; nothing is uploaded.
  2. 2
    Set it up
    Drag the handles to the part that should ring, up to 30 seconds. Press play to hear the file first.
  3. 3
    Save the result
    Press Make ringtone. Each new file is made on your device and saved where you choose.
Where your file goes
Nowhere. It stays on this device.

The file is read from your disk and processed inside this tab. Close the tab and nothing is left anywhere else.

What it takes
Almost any sound file

MP3, WAV, M4A, AAC, FLAC, OGG, Opus, AIFF, WMA, CAF and M4B files all work.

The ringtone your phone came with is the one plenty of other phones have too. A few seconds of a song you love is easier to pick out across a room, and much nicer to hear. This ringtone maker cuts that part out of your song and saves it as the file your phone wants, right in your browser.

Choose your phone, drag two handles around the part that should ring, and press Make ringtone. The page works as an iPhone ringtone maker, saving an M4R file, and as an Android ringtone maker, saving an MP3. That makes it an easy way to convert an MP3 to a ringtone, or to change MP3 to M4R for an iPhone, with nothing to install. Your song never leaves your device.

How to make a ringtone from a song

  1. Choose a song, or drop it anywhere on the page. It opens with its waveform as the timeline, and the first 30 seconds are already picked for you.
  2. Under Phone, choose iPhone (.m4r) or Android (.mp3). iPhone is chosen to start with.
  3. Drag the two red handles to the part you want to hear when your phone rings. Drag the box between them to slide the whole clip along the song without changing its length.
  4. Leave the fades as they are, or change them with the Fade in and Fade out sliders.
  5. Press Make ringtone and save the file. It keeps your song's name with _ringtone on the end, so song.mp3 becomes song_ringtone.m4r for an iPhone or song_ringtone.mp3 for Android.

Press play before you save: click the stage or press the space bar. The preview plays the clip you picked, so you can check it starts on the right note. The fades are added only to the saved file.

Setting Start and End to the exact moment

For a clip that begins right on the first word of a chorus, type the time into Start or End, or play the song, pause where the clip should begin and press Playhead next to Start. Do the same for End. On the timeline, the I and O keys set the two handles at the playhead too.

Under End you will read "A ringtone can be up to 30 seconds." The summary at the bottom of the panel shows how long your clip is, for example "Ringtone: 24.0 s of up to 30 s", so you always know how much room is left.

Picking the best 30 seconds of a song

Apple says iPhone ringtones can be up to 30 seconds long. Android sets no fixed limit, but a ringtone only plays until you answer or the call stops, so the page keeps both phones to the same 30 seconds. The clip can never run longer: End stops 30 seconds after Start, and if you move Start earlier, End moves with it.

  • Start on something you recognise at once, such as the first line of the chorus or a strong opening riff. A long, quiet intro can be over before you notice the phone.
  • Pick a part with some energy. A soft passage that sounds lovely on headphones is easy to miss when the phone is in a bag or another room.
  • Think about the repeat. Most phones play the ringtone again from the top until you answer, so a clip that ends on a beat sounds smoother each time round.
  • It does not have to be music. A voice note or a short sound effect works too, as long as the file has sound.
Tip: Is the part you want too quiet? Make the song louder first with the audio volume booster, then open the louder file here and cut your ringtone from it.

Fade in and fade out, on from the start

A ringtone that bursts in at full volume can make you jump, and one cut in the middle of a note stops with a jolt. So the fades are on before you touch anything: a 1 second fade in and a 2 second fade out. You change them with the Fade in and Fade out sliders, in tenths of a second.

Each fade can be up to 5 seconds, or half the clip when that is shorter, so the two never overlap. Slide one all the way down to Off to drop it. Here are some starting points.

Starting points for the two fades
Kind of clipFade inFade out
A chorus that starts loudOff or 0.5 s2 s
A slow song or a gentle intro1 to 2 s3 to 5 s
A voice note or a short soundOffOff or 0.5 s

M4R for iPhone, MP3 for Android

The Phone switch decides which file you get, and the last line of the panel, Saved as, tells you before you press anything.

What each phone gets
iPhone (.m4r)Android (.mp3)
Saved asM4R for iPhone, 192 kbpsMP3 for Android, at about the bitrate of your MP3, or 192 kbps for any other file
A 30-second ringtoneAbout 0.7 MBAbout 0.7 MB at 192 kbps, about 1.2 MB at 320 kbps
File namesong_ringtone.m4rsong_ringtone.mp3

An MP3 keeps about its own bitrate, rounded to the nearest standard rate at or above it, between 32 and 320 kbps. A song recorded below 32 kHz is saved at up to 160 kbps, and Saved as shows the real figure.

Convert MP3 to M4R for an iPhone

From a computer, an iPhone takes M4R ringtones, not MP3s. Used as an iPhone ringtone maker, this page writes the M4R for you: open your song, keep Phone on iPhone (.m4r), and the clip is saved at 192 kbps, cut and faded in the same step.

Every ringtone is written fresh, so one made from an MP3 can lose a very little quality. Through a phone speaker that is very hard to hear.

Putting the ringtone on your iPhone

The panel's note gives the usual route. Put the .m4r on your iPhone from a computer: Finder on a Mac, or the Apple Devices app or iTunes on Windows. Then pick it in Settings, Sounds & Haptics, Ringtone. That is the path on most iPhones, but menu names can differ between iOS versions.

Putting the ringtone on your Android phone

As an Android ringtone maker, the page saves a plain MP3, the kind of file Android phones take as a ringtone. Copy the .mp3 to your phone's Ringtones folder, or open it there, then pick it in Settings, Sound, Phone ringtone. That works on most phones, though the menu names differ by maker, model and Android version.

Private, free, and what to use next

The whole job happens in your browser tab. Your song is read from your device, the ringtone is made there, and nothing is uploaded, so there is nothing to delete afterwards. The privacy policy explains what the site does collect.

It is free, with no account and no watermark, and it is not counted in the free daily limit, which applies to document conversions only. Most files have no size limit. A few kinds, such as WMA or AIFF, take longer and can be up to 2 GB. The editor's note reads "Fast, on this device. Nothing uploaded" or "Slower for this file, on this device". It works in current Chrome, Edge and Firefox.

Need a clip longer than 30 seconds, or one saved as MP3 or WAV for something other than a phone? Use Trim audio. If your song is an M4A you also want as an MP3 for everyday listening, M4A to MP3 does that, and the audio converter handles other formats. Every page is listed under Audio Tools.

Make your own ringtone now

A ringtone you picked yourself is one you will know the moment it plays. Choose your song above, set Phone to iPhone or Android, drag the handles to the best 30 seconds and press Make ringtone. Save the file, put it on your phone, and your song stays on your device the whole time.

Questions people ask

How long can my ringtone be?

Up to 30 seconds. Apple says iPhone ringtones can be up to 30 seconds long. Android has no fixed limit, but the page keeps both phones to 30 seconds, and the handles will not let a clip run longer. Shorter clips are fine too.

How do I convert MP3 to M4R?

Open the MP3 here, keep Phone on iPhone (.m4r), move the handles to the part you want and press Make ringtone. You get an M4R at 192 kbps, named like song_ringtone.m4r, ready to put on your iPhone.

Why do I not hear the fades when I press play?

The preview plays the clip as you picked it. The fade in and fade out are added when the file is made, so you hear them in the saved ringtone. Save it and play the file to check.

Can I turn any song into a ringtone?

Yes, as long as the file is on your device and has sound. You can convert an MP3 to a ringtone, and WAV, M4A, FLAC, OGG and most other sound files work too, such as AAC, Opus, AIFF, WMA, AMR, CAF and M4B. There is no ringtone library here: you bring your own song.

Is my song uploaded anywhere?

No. The song is read from your device and the ringtone is made inside this browser tab. Nothing reaches our servers, and you do not need an account.

Step by step

  1. 1

    Choose a song, or drop it anywhere on the page. It opens with its waveform.

  2. 2

    Pick iPhone or Android, then drag the two handles to the part that should ring, up to 30 seconds. The fades are on to start with.

  3. 3

    Press Make ringtone, then save the file and put it on your phone.

Our cookies keep you signed in. If you accept, we also load Google Tag Manager, which runs Google Analytics and Microsoft Clarity (which records how you move around the site). None of them run unless you accept. The privacy page has the details.

Read first