You want to practise a song at 90 BPM, but the recording runs at 120. Or you are a DJ with a track at 124 BPM that has to sit next to one at 128. Either way, you already know the two numbers. This BPM changer takes them and turns your song into a file at the new tempo, inside your browser.
Type the song's BPM and the BPM you want, and the page works out the speed and the new length for you. The pitch stays where it was, so you change the tempo of a song without changing its key. It is a free tempo changer for MP3, WAV, M4A, FLAC and most other sound files, and the file never leaves your device.
How to change the BPM of a song
- Choose a song, or drop it anywhere on the page. It opens with its waveform as the timeline and a Sound only card on the stage.
- The page starts with BPM picked under Set the. Type the song's tempo into Song's BPM, and the tempo you are after into BPM you want.
- Check the summary, then press play (click the stage or press the space bar) to hear the song at its new tempo.
- Under Save as, keep MP3 or pick WAV. Press Change speed, then save the new file.
Until both fields hold a number, the page reads "Type the song's BPM and the BPM you want", and the Speed line says Type both BPMs. Once you type the second number, the summary fills in, so you see what the change will do before anything is saved.
The new file keeps the song's name with the BPM you asked for on the end, so song.mp3 taken to 90 BPM comes back as song_90bpm.mp3. Several practice versions of one track can then sit side by side.
Reading the summary
- Speed is the BPM you want divided by the song's BPM, such as 0.75×.
- Length now is how long the song runs today.
- New length is how long it will run at the new tempo.
- Saved as names the file you will get, such as "MP3, 192 kbps" or "WAV, 16-bit".
How the BPM changer works out the speed
The maths is one division: the BPM you want divided by the song's BPM. A song at 120 BPM taken to 90 BPM plays at 90 ÷ 120, which is 0.75×. Because it plays slower, it also runs longer: the new file is 4/3 as long, so a 3-minute song becomes a 4-minute one.
| From and to | Speed | New length | Good for |
|---|---|---|---|
| 120 to 90 BPM | 0.75× | 4:00 | Learning a fast part slowly |
| 124 to 128 BPM | 1.0323× | About 2:54 | Matching one dance track to the next |
| 140 to 70 BPM | 0.5× | 6:00 | A half-speed pass through a hard section |
| 85 to 170 BPM | 2× | 1:30 | Pushing a slow groove up to double time |
The speed is worked out to four decimal places (124 to 128 shows as 1.0323×), so as long as the song's BPM you typed is right, the new file lands on the tempo you asked for.
How far the tempo can move
The speed can go from 0.25× to 4×. So the BPM you want can be anything from a quarter of the song's BPM to four times it: for a song at 120 BPM, that is 30 to 480 BPM. The help under BPM you want says the same: Up to four times faster or slower than the song.
Type two BPMs further apart and the page tells you, for example "120 to 500 BPM is 4.1667×. The speed can go from 0.25× to 4×, so pick BPMs no more than four times apart". Type the same BPM twice and it asks for a different one, since a file at 1× would be the song you already have.
Finding the song's BPM before you start
This page does not guess the tempo. Before you change the tempo of a song here, you need its BPM, and the BPM finder reads it from your song file on your device. The result is only as right as the number you start from.
- Look in your music app's song details, where many tracks list their BPM.
- Use the BPM tapper: tap along with the beat for a few bars and it shows the BPM.
- Count it yourself: count the beats for 15 seconds and multiply by four. Twenty-two beats in 15 seconds is 88 BPM.
- Check the sheet music, which often gives the tempo at the top.
Both fields take a decimal, so a song at 127.5 BPM can be typed just as it is. If your count is a little out, the new file will drift slowly against a click track or another song, so play them together before you rely on it.
Practising and mixing at a new tempo
For musicians learning a song
Slowing a song down is the classic way to learn a fast solo or a tricky rhythm. Because the pitch stays the same, the song keeps its key, so you can play along on your own instrument without retuning. Work up in steps: for a 120 BPM song, make versions at 84, 96 and 108 BPM, and move up as the part gets easier.
To drill one passage, cut it out first with Trim audio, slow that short file down here, then repeat it as many times as you like with Loop audio. Each step saves a new file, and your original song is only read, never changed.
For DJs matching tempos
When two tracks sit a few BPM apart, a small nudge lets them play together without the beats drifting. Type the track's BPM and the BPM of the track you are mixing into, and the speed lands just above or below 1×, such as 1.0323× for 124 to 128 BPM. The key stays the same, so a vocal does not end up sounding higher or lower.
This is a tempo changer for getting files ready before a set, not a live control. It also suits dance and fitness classes that need a routine at a set tempo.
The file you get, and where it is made
Under Save as there are two tiles, MP3 (Plays everywhere) and WAV (Every sample kept), each with the size it will make. A WAV song starts as WAV and anything else starts as MP3. An MP3 is saved at about the bitrate of the song you opened, other files become a 192 kbps MP3, and a WAV is 16-bit.
The sound is always written afresh, so an MP3 can lose a very little quality along the way. If you plan to change the same song again later, save a WAV, or go back to the original file each time rather than a copy you already changed.
Changing the tempo takes the slower way on every file, and the note in the editor reads "Slower for this file, on this device". A long song may take a while, and a file can be up to 2 GB. It all happens in your browser in current Chrome, Edge or Firefox, and the song is never uploaded, as our privacy policy explains.
Would you rather pick a speed than a tempo? Change audio speed has a slider from 0.5× to 2×, and you can also switch Set the to Speed on this page. The rest of the sound tools are listed under audio tools.
Put your song at the tempo you need
Type two numbers and the BPM changer does the maths: the speed, the new length and a file named for its new tempo, with the key left as it was. Choose your song above, type its BPM and the BPM you want, listen, and press Change speed. It is a free tempo changer, and your music stays on your device.